HT-HIP-1200C high temperature high pressure autoclave adopts nickel-based superalloy as core material, boasting remarkable creep strength and great anti-oxidation performance.
Working limits: 1100°C max temperature, 4 MPa maximum pressure, works perfectly under oxygen or inert gas conditions.
Perfect lab equipment for hydrothermal synthesis of advanced functional materials, widely applied in high oxygen pressure heat treatment of test samples.
Key upgrade highlights:
1.Solenoid valve fitted on flange to realize automatic pressure release control
2.Supporting dedicated software for real-time temperature adjustment & pressure tracking.
Multi-scenario application: Apart from hydrothermal experiments, the device can work independently as a steam generator to meet various lab research needs.
Main technical data
Working Voltage | AC 208~240V, Single Phase 4.2 KW |
Reactor Capacity & Dimensions | Capacity 30ml~100ml customizable
|
Working Temperature & Control | Working temp<1100 °C Max. Temp-1200℃ Digital temperature controller with 30 segment programmable Temperature accuracy +/- 1°C Recommend heating rate <=10°C/min |
Thermocouple | K-type |
Working Pressure | l 16.5 MPa (2393 PSI) ≤ 800℃ l 10 MPa (1450 PSI) ≤ 900℃ l 5 MPa (725 PSI) ≤ 1000℃ l 3 MPa (435 PSI) ≤ 1100℃ |
Structure | Safety Warning l To ensure operational safety, the high-pressure reactor and heating furnace must be housed inside an explosion-proof cabinet when running under high-pressure working conditions. l Do not stand directly in front of the top flange without proper protective measures to prevent potential safety hazards. |
Pressure Sensor | Precision high-pressure sensor (measurement Range up to 250 bars) installed on the pressure vessel. |
PC Control | 1. Software: PC temperature control & pressure display 2. LabVIEW compatible PC control unit 3. Real-time pressure & temperature tracking |
Accessories | l SS316 needle valve equipped, matched with 1/4 pipe connector & pressure gauge l 48mm outer diameter copper gaskets ×2 l Optional torque wrench to stop over-tightening flange bolts l Email us to get proper tightening torque parameters for the reactor |
HT-HIP-1200C high temperature high pressure autoclave adopts nickel-based superalloy as core material, boasting remarkable creep strength and great anti-oxidation performance.
Working limits: 1100°C max temperature, 4 MPa maximum pressure, works perfectly under oxygen or inert gas conditions.
Perfect lab equipment for hydrothermal synthesis of advanced functional materials, widely applied in high oxygen pressure heat treatment of test samples.
Key upgrade highlights:
1.Solenoid valve fitted on flange to realize automatic pressure release control
2.Supporting dedicated software for real-time temperature adjustment & pressure tracking.
Multi-scenario application: Apart from hydrothermal experiments, the device can work independently as a steam generator to meet various lab research needs.
Main technical data
Working Voltage | AC 208~240V, Single Phase 4.2 KW |
Reactor Capacity & Dimensions | Capacity 30ml~100ml customizable
|
Working Temperature & Control | Working temp<1100 °C Max. Temp-1200℃ Digital temperature controller with 30 segment programmable Temperature accuracy +/- 1°C Recommend heating rate <=10°C/min |
Thermocouple | K-type |
Working Pressure | l 16.5 MPa (2393 PSI) ≤ 800℃ l 10 MPa (1450 PSI) ≤ 900℃ l 5 MPa (725 PSI) ≤ 1000℃ l 3 MPa (435 PSI) ≤ 1100℃ |
Structure | Safety Warning l To ensure operational safety, the high-pressure reactor and heating furnace must be housed inside an explosion-proof cabinet when running under high-pressure working conditions. l Do not stand directly in front of the top flange without proper protective measures to prevent potential safety hazards. |
Pressure Sensor | Precision high-pressure sensor (measurement Range up to 250 bars) installed on the pressure vessel. |
PC Control | 1. Software: PC temperature control & pressure display 2. LabVIEW compatible PC control unit 3. Real-time pressure & temperature tracking |
Accessories | l SS316 needle valve equipped, matched with 1/4 pipe connector & pressure gauge l 48mm outer diameter copper gaskets ×2 l Optional torque wrench to stop over-tightening flange bolts l Email us to get proper tightening torque parameters for the reactor |
