The HT-900X-HV is a top-loading two-zone high vacuum furnace with a maximum operating temperature of 900 degrees centigrade using resistance heating wires. The temperature control accuracy is ±0.1°C with two Eurotherm 3004 temperature controllers.
The furnace also comes with a stainless steel chamber with an OD of 216 mm and a height of 600 mm. The three-layer quartz thermal block and high-vacuum compatible fittings and flanges ensure a vacuum level of up to 10-7 torr at an elevated temperature.
The furnace can also be used at ambient pressure with an inert or a reducing gas flow.
Specification
Power | 208 - 240 VAC / 50/60Hz, 1 ph, 8 kW (50 A power line is required) 10-ft power cord A power plug is not included at an extra cost. |
Ultimate Vacuum | ≤ 7E-7 torr |
Working Temperature | 900℃ |
Heating Rate | ≤10°C/ min |
Heating Area | Dual heating zone ID 250 × H 350 mm (175+175mm) |
Effective Heating Area | Ø200 × H350 mm (maximum sample size) |
Heating Chamber | 310 stainless steel Ø216×Ø206×600H DN200CF flange |
Thermocouple | K type |
Heating Element | NiCrAl: Mo |
Thermal Block | Quartz Ø204×158 mm |
Temperature Controller | Two EPC3004 Eurotherm PID temperature controllers 28 temperature segments ±0.1℃accuracy/resolution RS485 communication port |
Chilled Water | Two Ø12 mm push-to-connect water inlet and outlet. Recommended cooling capacity: 1500 – 2500 btu/h Recommended water flow: 5-15L/min |
Warranty | One-year limited warranty Consumables are not covered, including the SS heating chamber, heating elements, thermocouples, and thermal blocks. Any damage caused by misuse or negligence or use of corrosive gas are not covered. |
Warning | The heating chamber is compatible with vacuum and ambient pressure. The chamber pressure should NOT exceed the ambient pressure. Never use the furnace at a positive pressure. |
Application Notes | Turbo pump Water Chiller Quartz Block Copper Gasket |
The HT-900X-HV is a top-loading two-zone high vacuum furnace with a maximum operating temperature of 900 degrees centigrade using resistance heating wires. The temperature control accuracy is ±0.1°C with two Eurotherm 3004 temperature controllers.
The furnace also comes with a stainless steel chamber with an OD of 216 mm and a height of 600 mm. The three-layer quartz thermal block and high-vacuum compatible fittings and flanges ensure a vacuum level of up to 10-7 torr at an elevated temperature.
The furnace can also be used at ambient pressure with an inert or a reducing gas flow.
Specification
Power | 208 - 240 VAC / 50/60Hz, 1 ph, 8 kW (50 A power line is required) 10-ft power cord A power plug is not included at an extra cost. |
Ultimate Vacuum | ≤ 7E-7 torr |
Working Temperature | 900℃ |
Heating Rate | ≤10°C/ min |
Heating Area | Dual heating zone ID 250 × H 350 mm (175+175mm) |
Effective Heating Area | Ø200 × H350 mm (maximum sample size) |
Heating Chamber | 310 stainless steel Ø216×Ø206×600H DN200CF flange |
Thermocouple | K type |
Heating Element | NiCrAl: Mo |
Thermal Block | Quartz Ø204×158 mm |
Temperature Controller | Two EPC3004 Eurotherm PID temperature controllers 28 temperature segments ±0.1℃accuracy/resolution RS485 communication port |
Chilled Water | Two Ø12 mm push-to-connect water inlet and outlet. Recommended cooling capacity: 1500 – 2500 btu/h Recommended water flow: 5-15L/min |
Warranty | One-year limited warranty Consumables are not covered, including the SS heating chamber, heating elements, thermocouples, and thermal blocks. Any damage caused by misuse or negligence or use of corrosive gas are not covered. |
Warning | The heating chamber is compatible with vacuum and ambient pressure. The chamber pressure should NOT exceed the ambient pressure. Never use the furnace at a positive pressure. |
Application Notes | Turbo pump Water Chiller Quartz Block Copper Gasket |
