HT-CBF is a Programmable Dip Coater with 2" Tube Furnace and color touch screen controller. It is designed for R&D Lab to prepare various optical or epitaxial films from the liquid solution under controlled temperature and atmosphere environment. Dipping rate, pulling rate, dwell time, and life cycle can be set up via the touch screen control. The solution is located at the bottom of the sealed tube at room temperature, and the sample can go through a hot zone up to 800oC (to protect the stainless steel wire and sample clamp) under various gas atmosphere or vacuum for achieving high-quality epitaxial films.
SPECIFICATIONS:
Dip Coater | l Working Voltage: 110V AC or 220V ) l Max. Power Consumption: 50W l 6"(L) x 4"(W) Touch Screen Display l Three stages pulling speed control l Total stoke length: 620mm l Pulling Speed: 1-200 mm/min programmable with an accuracy of +/- 0.05% l Dwelling time at constant temperature zone: 1-999 seconds l Lower or higher pulling or dipping speed is available upon request at extra cost |
Tube Furnaces | l Working Voltage: 110V AC or 220V l Max. Power Consumption: 2KW l Tube size: 2" (OD) x 24"(L) l Heating Zone Length: 12" (300mm) l Max. heating temperature: 1200°C l Continuous working temperature: 1100°C l 30 segment programmable digital temperature controller l Note: Max. working temperature for dip coating is limited by pulling wire l Included stainless steel wire Max. working temperature < 800°C l Ni-Cr-Al wire ( not included ) Max. working temperature < 1100°C l Platinum wire ( not included ) Max. working temperature 1200°C , 1600°C |
Pulling wire | l Three sets of Ni-SS pulling wire are included. Max. The working temperature is 800°C. l Optional pulling wire for higher working temperature: l Ni-Cr-Al wire max. working temperature: 1100C l Platinum wire max. working temperature: 1200 - 1600C |
Stage Length | l Lower Stage (Pre-heat zone): 236mm l Center Stage (Constant temperature zone): 150mm l Upper Stage (Cooling zone): 234mm |
Product Dimensions | l 560mm(L) x 470mm(W) x 1435mm(H) |
Warranty | l One Year limited warranty with lifetime support. l Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty. |
Net Weight | l 105 kg (230 lbs) |
HT-CBF is a Programmable Dip Coater with 2" Tube Furnace and color touch screen controller. It is designed for R&D Lab to prepare various optical or epitaxial films from the liquid solution under controlled temperature and atmosphere environment. Dipping rate, pulling rate, dwell time, and life cycle can be set up via the touch screen control. The solution is located at the bottom of the sealed tube at room temperature, and the sample can go through a hot zone up to 800oC (to protect the stainless steel wire and sample clamp) under various gas atmosphere or vacuum for achieving high-quality epitaxial films.
SPECIFICATIONS:
Dip Coater | l Working Voltage: 110V AC or 220V ) l Max. Power Consumption: 50W l 6"(L) x 4"(W) Touch Screen Display l Three stages pulling speed control l Total stoke length: 620mm l Pulling Speed: 1-200 mm/min programmable with an accuracy of +/- 0.05% l Dwelling time at constant temperature zone: 1-999 seconds l Lower or higher pulling or dipping speed is available upon request at extra cost |
Tube Furnaces | l Working Voltage: 110V AC or 220V l Max. Power Consumption: 2KW l Tube size: 2" (OD) x 24"(L) l Heating Zone Length: 12" (300mm) l Max. heating temperature: 1200°C l Continuous working temperature: 1100°C l 30 segment programmable digital temperature controller l Note: Max. working temperature for dip coating is limited by pulling wire l Included stainless steel wire Max. working temperature < 800°C l Ni-Cr-Al wire ( not included ) Max. working temperature < 1100°C l Platinum wire ( not included ) Max. working temperature 1200°C , 1600°C |
Pulling wire | l Three sets of Ni-SS pulling wire are included. Max. The working temperature is 800°C. l Optional pulling wire for higher working temperature: l Ni-Cr-Al wire max. working temperature: 1100C l Platinum wire max. working temperature: 1200 - 1600C |
Stage Length | l Lower Stage (Pre-heat zone): 236mm l Center Stage (Constant temperature zone): 150mm l Upper Stage (Cooling zone): 234mm |
Product Dimensions | l 560mm(L) x 470mm(W) x 1435mm(H) |
Warranty | l One Year limited warranty with lifetime support. l Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty. |
Net Weight | l 105 kg (230 lbs) |
