This is a small-scale Czochralski (CZ)Crystal Growth Furnacefor metals and oxides with a diameter < 1". It has been proven excellent for pulling various crystals with up to 2100C, including Al2O3, GGG, YAG, LaAlO3, Si, Ge, etc. We provides technical training on installing and operating before shipping, also provides online video technical support worldwide.
Specifications
Power | Input:208V or 380V,3 Phase,50A(max induction power),50/60Hz |
Max.Temperature | 2100C with induction heating |
Vacuum Chamber | Material:SS304 Size: Φ320×320mm, equipped with a quartz window (Φ120mm) to observe material melting, crystal seeding, and growth. There is one KF25 port and one KF40 vacuum port connected to the back of the chamber.There is also one LF160 port on the right side of the chamber for molecular pump system connecting. |
Pulling Mechanism | The pulling mechanism is driven by a precision servo motor/n Pulling Speed:0.1-10mm/hr Pulling rod rotation speed:0.1-23rpm Travel Distance:0-300mm The pulling mechanism can move as quickly as 35mm/min |
Vacuum atmosphere | The vacuum chamber can be evacuated and filled with inert gases. Equipped with a digital anti-corrosion vacuum gauge. Vacuum level:5×10-5 torr or 5×10-2 torr |
Induction Heating | 25KW(30-80KHz)induction power supply with Time Controller and Power Controller. Induction coil：116L/min circulating water chiller is not included. The crucible and thermal insulation accessories are not included. |
Control Panel | Touch screen control panel control、Induction power、Pulling speed、Rotating speed |
Dimension | 900mm(L)*1100mm(W)*2100mm(H) |
Warranty | One-year limited warranty. |
Attention:When performing heating operations, the heating power should be gradually increased to avoid sudden increases that may cause equipment damage or crystal growth failure. During the heating process, closely monitor the temperature changes to ensure that the temperature meets the requirements before proceeding with crystal growth operations. If the temperature is abnormal, adjust the heating power or stop the equipment operation in a timely manner.
This is a small-scale Czochralski (CZ)Crystal Growth Furnacefor metals and oxides with a diameter < 1". It has been proven excellent for pulling various crystals with up to 2100C, including Al2O3, GGG, YAG, LaAlO3, Si, Ge, etc. We provides technical training on installing and operating before shipping, also provides online video technical support worldwide.
Specifications
Power | Input:208V or 380V,3 Phase,50A(max induction power),50/60Hz |
Max.Temperature | 2100C with induction heating |
Vacuum Chamber | Material:SS304 Size: Φ320×320mm, equipped with a quartz window (Φ120mm) to observe material melting, crystal seeding, and growth. There is one KF25 port and one KF40 vacuum port connected to the back of the chamber.There is also one LF160 port on the right side of the chamber for molecular pump system connecting. |
Pulling Mechanism | The pulling mechanism is driven by a precision servo motor/n Pulling Speed:0.1-10mm/hr Pulling rod rotation speed:0.1-23rpm Travel Distance:0-300mm The pulling mechanism can move as quickly as 35mm/min |
Vacuum atmosphere | The vacuum chamber can be evacuated and filled with inert gases. Equipped with a digital anti-corrosion vacuum gauge. Vacuum level:5×10-5 torr or 5×10-2 torr |
Induction Heating | 25KW(30-80KHz)induction power supply with Time Controller and Power Controller. Induction coil：116L/min circulating water chiller is not included. The crucible and thermal insulation accessories are not included. |
Control Panel | Touch screen control panel control、Induction power、Pulling speed、Rotating speed |
Dimension | 900mm(L)*1100mm(W)*2100mm(H) |
Warranty | One-year limited warranty. |
Attention:When performing heating operations, the heating power should be gradually increased to avoid sudden increases that may cause equipment damage or crystal growth failure. During the heating process, closely monitor the temperature changes to ensure that the temperature meets the requirements before proceeding with crystal growth operations. If the temperature is abnormal, adjust the heating power or stop the equipment operation in a timely manner.
