SPECIFICATIONS:
Power Requirements | Power: 208 - 240 VAC, Single phase Max. 3500 power consumption A 10-foot power cable is included without a power plug |
Vacuum chamber | l The vacuum chamber is made of stainless steel l Vacuum Chamber: Ø315 mm × 315 mm H (inner dimension) l One Ø120 mm quartz observation window. l Built-in a rocker arm to rotate the crucible and cast into a water-cooled copper or a refractory mold. l One KF25 and one KF40 vacuum port are built at the back of the chamber. l DN160 ISO-K port is built on the left of the chamber for connection of a turbopump l Two KF16 and a KF25 port on the top of the chamber for a vacuum meter or other device. l The mechanical stirring function is built in for uniform alloying. l The secondary material feeder is included, which can feed 3 types of volatile dopants into the crucible during melting under vacuum. |
Crucible & Casting Mold | l Two graphite crucibles are included ² Graphite crucible 1: Ø47 OD × Ø35 ID × 88 H mm; working volume ~70 ml (up to 400g Fe alloy) ² Graphite crucible 2: Ø75 OD × Ø60 ID × 105 H mm; working volume ~250 ml (up to 1200g Fe alloy) l Optional BN liners for graphite crucible are also available. ² BN liner for crucible 1: Ø34 OD × Ø28 ID × 80 H mm ² BN liner for crucible 2: Ø58 OD × Ø50 ID × 100 H mm l An optional copper casting mold is also available. |
Heating & Temperature controller | l NiCrAl resistance coil as the heater up to 1200ºC l Precise 30-segment programmable temperature controller l PID and Autotune as well as overheating protection l +/- 1ºC accuracy l K-Type thermal couple |
Pressure Gauge & Flow meter | l Corrosion-proof Capacitance Diaphragm Gauge with ceramic coated sensor head is included with a wide measure range (3E-5 ~ 1013 torr) l One 0.2 - 2 L/min float flow meter is included. |
Vacuum and Pressure | l Chamber vacuum: ² 10E-2 torr within 60 minutes via a mechanical pump ² 2E-5 torr overnight pumping via a 67L/s turbopump ² 1E-6 torr via a 260 L/s turbopump. l For the vacuum, please click the picture below to order a pump separately l Max. positive inert gas pressure: 2 bar |
Warranty: | l One-year limited warranty with lifetime support |
SPECIFICATIONS:
Power Requirements | Power: 208 - 240 VAC, Single phase Max. 3500 power consumption A 10-foot power cable is included without a power plug |
Vacuum chamber | l The vacuum chamber is made of stainless steel l Vacuum Chamber: Ø315 mm × 315 mm H (inner dimension) l One Ø120 mm quartz observation window. l Built-in a rocker arm to rotate the crucible and cast into a water-cooled copper or a refractory mold. l One KF25 and one KF40 vacuum port are built at the back of the chamber. l DN160 ISO-K port is built on the left of the chamber for connection of a turbopump l Two KF16 and a KF25 port on the top of the chamber for a vacuum meter or other device. l The mechanical stirring function is built in for uniform alloying. l The secondary material feeder is included, which can feed 3 types of volatile dopants into the crucible during melting under vacuum. |
Crucible & Casting Mold | l Two graphite crucibles are included ² Graphite crucible 1: Ø47 OD × Ø35 ID × 88 H mm; working volume ~70 ml (up to 400g Fe alloy) ² Graphite crucible 2: Ø75 OD × Ø60 ID × 105 H mm; working volume ~250 ml (up to 1200g Fe alloy) l Optional BN liners for graphite crucible are also available. ² BN liner for crucible 1: Ø34 OD × Ø28 ID × 80 H mm ² BN liner for crucible 2: Ø58 OD × Ø50 ID × 100 H mm l An optional copper casting mold is also available. |
Heating & Temperature controller | l NiCrAl resistance coil as the heater up to 1200ºC l Precise 30-segment programmable temperature controller l PID and Autotune as well as overheating protection l +/- 1ºC accuracy l K-Type thermal couple |
Pressure Gauge & Flow meter | l Corrosion-proof Capacitance Diaphragm Gauge with ceramic coated sensor head is included with a wide measure range (3E-5 ~ 1013 torr) l One 0.2 - 2 L/min float flow meter is included. |
Vacuum and Pressure | l Chamber vacuum: ² 10E-2 torr within 60 minutes via a mechanical pump ² 2E-5 torr overnight pumping via a 67L/s turbopump ² 1E-6 torr via a 260 L/s turbopump. l For the vacuum, please click the picture below to order a pump separately l Max. positive inert gas pressure: 2 bar |
Warranty: | l One-year limited warranty with lifetime support |
