SPECIFICATIONS:
Input Power | l 208~240 VAC single phase, 50/60Hz l Max power consumption: 2.5KW l > 30A air breaker required. l The power cable is included without a plug. |
Melt Chamber | l Material: SS316 l Dimension: ID Φ54 mm x，H 230mm l Capacity: ~ 500 ml Max. ( 20-250g ) l heating temperature: 3 zones heating with 350 °C Max. l Temperature Control:three 30 Segment programmable temperature controllers l Temperature accuracy: +/- 0.5°C |
Melt Extrusion | l Melt is extruded by high-pressure inert gas up to 25 bar ( Usually works at 10 bars) l The extrusion speed is adjustable between 0.1-10mm/ min by adjusting gas pressure l The system max. pressure load: 5 Mpa |
Control Panel | l PLC touch screen control panel l PC remote control software is included for the control of temperature, pressure, and speed. l If you decide to use the remote control function, please order a laptop from us to test the software. |
Orifice Spinneret | l Spinning head (orifice spinneret): single hole extrusion die with diameter 0.1 mm - 3.0 mm selectable (standard single hole diameter is 0.15 mm ) l Optional: multi-hole extrusion die is available up to 32 holes upon request at extra cost l Note: 0.1 mm hole can produce 5 - 10-micron diameter fiber depended winding wheel speed, which will provide a certain tensile force to make fiber diameter smaller l The extrusion die is consumables. The spare die is available at extra cost l You may choose a slit-die to extrude a tape ( film) |
Winding Wheel | l Winding wheel: 100 mm in diameter. l Winding speed: 10-50m/min adjustable l The wheel is a swing and the length is adjustable l The wheel is easy to install and replace |
Warranty | l One-year limited warranty with lifetime support |
Dimensions | l 850 mm L x 700 mm W x 1700 mm H |
Net Weight | l 300 kg |
SPECIFICATIONS:
Input Power | l 208~240 VAC single phase, 50/60Hz l Max power consumption: 2.5KW l > 30A air breaker required. l The power cable is included without a plug. |
Melt Chamber | l Material: SS316 l Dimension: ID Φ54 mm x，H 230mm l Capacity: ~ 500 ml Max. ( 20-250g ) l heating temperature: 3 zones heating with 350 °C Max. l Temperature Control:three 30 Segment programmable temperature controllers l Temperature accuracy: +/- 0.5°C |
Melt Extrusion | l Melt is extruded by high-pressure inert gas up to 25 bar ( Usually works at 10 bars) l The extrusion speed is adjustable between 0.1-10mm/ min by adjusting gas pressure l The system max. pressure load: 5 Mpa |
Control Panel | l PLC touch screen control panel l PC remote control software is included for the control of temperature, pressure, and speed. l If you decide to use the remote control function, please order a laptop from us to test the software. |
Orifice Spinneret | l Spinning head (orifice spinneret): single hole extrusion die with diameter 0.1 mm - 3.0 mm selectable (standard single hole diameter is 0.15 mm ) l Optional: multi-hole extrusion die is available up to 32 holes upon request at extra cost l Note: 0.1 mm hole can produce 5 - 10-micron diameter fiber depended winding wheel speed, which will provide a certain tensile force to make fiber diameter smaller l The extrusion die is consumables. The spare die is available at extra cost l You may choose a slit-die to extrude a tape ( film) |
Winding Wheel | l Winding wheel: 100 mm in diameter. l Winding speed: 10-50m/min adjustable l The wheel is a swing and the length is adjustable l The wheel is easy to install and replace |
Warranty | l One-year limited warranty with lifetime support |
Dimensions | l 850 mm L x 700 mm W x 1700 mm H |
Net Weight | l 300 kg |
