HT-1200C-GaN is a swingable dual heating-zone, high-pressure furnace up to 10 MPa @ 1200°C.It is designed especially for crystal growth, such as flux method, ammonia-thermal method, or LPE for GaN or YIG. It can also be used as a conventional HIP furnace.
Specifications：
Furnace Structure | l The furnace chamber is made of stainless steel (SS304) with water cooling l Max. pressure 10 MPa @1200ºC l Swingable drive by a gear motor. l Two heating zones of 80 mm ID x 120 mm H each, separated by a ceramic plate (300 mm thick). l One explosive-proof steel cover is included. The furnace can be slid into the box for safe operation l The mobile cart is included for easy moving |
Furnace Chamber | l The furnace Chamber is made of SS304 steel with a water cooling jacket. ① Ø310 × Ø205 × H250 mm l One digital high-pressure transmitter is included. l Two water-cooled high-pressure electric feedthrough are built into the chamber for resistance heating l G1/4 gas inlet and outlet with high-pressure needle valves are included l The mechanical pressure relief valve is installed l One KJ6200 water chiller is included l The chamber is swingable ±15 degrees by a gear motor to make a uniform melting flux. |
Heating Zone | l Mo or Ni-Cr-Al resistance wire is used as heating element heating with moly reflection plates l Two heating zones with the dimension below: ① Inside Diameter:80 mm ② Length：130 mm l Max. Working Temperature: 1200ºCmax.at 10 MPa l Heating Rate:5 ºC/min l Optional:The furnace can be upgraded 1500°C at the extra cost |
Temperature Control | l Two Eurotherm 3000 series temperature controllers are installed to control two heating zones independently. l Single loop, 24 temperature segments for ramping, cooling, and dwelling. l Temperature fluctuation:±0.1℃ l RS485 port is built-in for PC operation l Operation software is included for remote control l Brand new laptop with the pre-installed software is available upon request. |
Vacuum Level | l The furnace also can be used as a vacuum furnace with an optional vacuum pump ① Double stage mechanical pump can reach 10E-2 torr ② Turbopump can reach 10E-5 torr |
Dimension & Weight | l 350 kg weight |
Power | l 208 - 240VAC,50-60 Hz l 10 KW Max. |
Warranty | l One-year limited warranty (Consumable parts such as o-rings and heating elements are not covered by the warranty) |
Application Note | l The furnace can be used as a HIP furnace to treat samples up to 200 mm L x 3" Dia. l The furnace can be used for GaN single crystal growth by flux and ammonia-thermal method |
HT-1200C-GaN is a swingable dual heating-zone, high-pressure furnace up to 10 MPa @ 1200°C.It is designed especially for crystal growth, such as flux method, ammonia-thermal method, or LPE for GaN or YIG. It can also be used as a conventional HIP furnace.
Specifications：
Furnace Structure | l The furnace chamber is made of stainless steel (SS304) with water cooling l Max. pressure 10 MPa @1200ºC l Swingable drive by a gear motor. l Two heating zones of 80 mm ID x 120 mm H each, separated by a ceramic plate (300 mm thick). l One explosive-proof steel cover is included. The furnace can be slid into the box for safe operation l The mobile cart is included for easy moving |
Furnace Chamber | l The furnace Chamber is made of SS304 steel with a water cooling jacket. ① Ø310 × Ø205 × H250 mm l One digital high-pressure transmitter is included. l Two water-cooled high-pressure electric feedthrough are built into the chamber for resistance heating l G1/4 gas inlet and outlet with high-pressure needle valves are included l The mechanical pressure relief valve is installed l One KJ6200 water chiller is included l The chamber is swingable ±15 degrees by a gear motor to make a uniform melting flux. |
Heating Zone | l Mo or Ni-Cr-Al resistance wire is used as heating element heating with moly reflection plates l Two heating zones with the dimension below: ① Inside Diameter:80 mm ② Length：130 mm l Max. Working Temperature: 1200ºCmax.at 10 MPa l Heating Rate:5 ºC/min l Optional:The furnace can be upgraded 1500°C at the extra cost |
Temperature Control | l Two Eurotherm 3000 series temperature controllers are installed to control two heating zones independently. l Single loop, 24 temperature segments for ramping, cooling, and dwelling. l Temperature fluctuation:±0.1℃ l RS485 port is built-in for PC operation l Operation software is included for remote control l Brand new laptop with the pre-installed software is available upon request. |
Vacuum Level | l The furnace also can be used as a vacuum furnace with an optional vacuum pump ① Double stage mechanical pump can reach 10E-2 torr ② Turbopump can reach 10E-5 torr |
Dimension & Weight | l 350 kg weight |
Power | l 208 - 240VAC,50-60 Hz l 10 KW Max. |
Warranty | l One-year limited warranty (Consumable parts such as o-rings and heating elements are not covered by the warranty) |
Application Note | l The furnace can be used as a HIP furnace to treat samples up to 200 mm L x 3" Dia. l The furnace can be used for GaN single crystal growth by flux and ammonia-thermal method |
