ZHENGZHOU HENGTONG FURNACE CO,. LTD
  • Product categories have not been added!
1700C Max 4 Channel Tube Furnace (1" Alumina Tube) for Hi-Throughput Annealing
1700C Max 4 Channel Tube Furnace (1
  • 1700C Max 4 Channel Tube Furnace (1
0

The Furnace is a compact four channels  25mm O.D. tube furnace for high throughput heat treatment research of alloy and ceramic material up to 1700°C.  It is an excellent tool to research the phase diagram in MGI's new generation material.

SPECIFICATIONS:

Furnace Structure
  • The furnace is consistent with 4 small tube furnace modules with alumina tube 25 OD x 22 ID x 460 L, mm 

  • Each heating module's temperature is controlled independently up to 1700°C

  • Quickly sealed flange,  Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas

  • Processing 4 samples with the different temperatures at compact space

Heating Element

MoSi2 heating elements (40mm x147mm)

Each channel with 4 heating elements, a total of 16 are installed

Working Temperature &

Constant Temperature Zon

Continuous Working Temperature 1600° C

Maximum Working Temperature 1700°C (< 1 hrs)

Constant temperature zone:  

+/- 1°C within center 30 mm cubic zone

+/- 5°C within center 60 mm cubic zone

Processing Tube

High purity alumina tube with   Φ25X L 460 mm, 4 tubes included

4 flowmeters are included 

The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves

Max. Vacuum  10-5 torr by turbopump

Only one vacuum pump required via a KF25 port. 


Temperature Control

Touch screen precision temperature controller with the protection of over-temperature and Thermal couple broke.

4 channel heating tube is controlled independently by 30 segments programmable temperature controller

4 B type Thermal Couple

PC control software is included, which can control 4 channel heaters by one Laptop

Heating Rate10 °C/ min Max. 
Temperature Accuracy+/- 1°C
Power &  Working Voltage

6 KW, 208 - 240V single phase,  50/60Hz  ( if 4 heating modules operation in the same time )

Three-phase, AC 380V - 460V available upon request.

Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.

Laptop, software & WiFi Control(Optional)

Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.

Labview Based Temperature Control System enables the user to edit temperature profiles, manage heat-treatment recipes, record and plot data for FT furnaces.

A wireless remote control provides up to 300 meters of operating range.

The above features are available upon request at an extra cost (up to $1,000).n.

Compliance

CE Certified

NRTL (UL61010)  or CSA certification is available upon request at extra cost.

Dimension1000 L x 650 W x 640  H, mm
Warranty

One year limited warranty with lifetime support

We reserve the right to upgrade the furnace structure for better performance without notice

Warning &

Application note

Max pressure of this furnace is 7.5 PSI (0.5 atm).  You must install a pressure regulator on your gas tank to avoid being over-pressured. 

This furnace also can be modified as a larger CVD furnace system with the proper gas delivery system. Please contact us to discuss your special application.


The Furnace is a compact four channels  25mm O.D. tube furnace for high throughput heat treatment research of alloy and ceramic material up to 1700°C.  It is an excellent tool to research the phase diagram in MGI's new generation material.

SPECIFICATIONS:

Furnace Structure
  • The furnace is consistent with 4 small tube furnace modules with alumina tube 25 OD x 22 ID x 460 L, mm 

  • Each heating module's temperature is controlled independently up to 1700°C

  • Quickly sealed flange,  Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas

  • Processing 4 samples with the different temperatures at compact space

Heating Element

MoSi2 heating elements (40mm x147mm)

Each channel with 4 heating elements, a total of 16 are installed

Working Temperature &

Constant Temperature Zon

Continuous Working Temperature 1600° C

Maximum Working Temperature 1700°C (< 1 hrs)

Constant temperature zone:  

+/- 1°C within center 30 mm cubic zone

+/- 5°C within center 60 mm cubic zone

Processing Tube

High purity alumina tube with   Φ25X L 460 mm, 4 tubes included

4 flowmeters are included 

The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves

Max. Vacuum  10-5 torr by turbopump

Only one vacuum pump required via a KF25 port. 


Temperature Control

Touch screen precision temperature controller with the protection of over-temperature and Thermal couple broke.

4 channel heating tube is controlled independently by 30 segments programmable temperature controller

4 B type Thermal Couple

PC control software is included, which can control 4 channel heaters by one Laptop

Heating Rate10 °C/ min Max. 
Temperature Accuracy+/- 1°C
Power &  Working Voltage

6 KW, 208 - 240V single phase,  50/60Hz  ( if 4 heating modules operation in the same time )

Three-phase, AC 380V - 460V available upon request.

Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.

Laptop, software & WiFi Control(Optional)

Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.

Labview Based Temperature Control System enables the user to edit temperature profiles, manage heat-treatment recipes, record and plot data for FT furnaces.

A wireless remote control provides up to 300 meters of operating range.

The above features are available upon request at an extra cost (up to $1,000).n.

Compliance

CE Certified

NRTL (UL61010)  or CSA certification is available upon request at extra cost.

Dimension1000 L x 650 W x 640  H, mm
Warranty

One year limited warranty with lifetime support

We reserve the right to upgrade the furnace structure for better performance without notice

Warning &

Application note

Max pressure of this furnace is 7.5 PSI (0.5 atm).  You must install a pressure regulator on your gas tank to avoid being over-pressured. 

This furnace also can be modified as a larger CVD furnace system with the proper gas delivery system. Please contact us to discuss your special application.