ZHENGZHOU HENGTONG FURNACE CO,. LTD
  • Product categories have not been added!
1500 ℃ Max 8 Channel Tube Furnace (50mm Quartz) for Hi-Throughput Annealing GSL
1500 ℃ Max 8 Channel Tube Furnace (50mm Quartz) for Hi-Throughput Annealing GSL
  • 1500 ℃ Max 8 Channel Tube Furnace (50mm Quartz) for Hi-Throughput Annealing GSL
  • 1500 ℃ Max 8 Channel Tube Furnace (50mm Quartz) for Hi-Throughput Annealing GSL
0 1

The  Furnace  is an 8 channels tube furnace with 50mm O.D. and sealing flange for high throughput heat treatment research of alloy and ceramic material up to 1500°C.  It is an excellent tool to research phase diagrams in MGI new generation material.

SPECIFICATIONS:

Furnace Structure
  • The furnace consists of 8 tube furnace modules with quartz tube 50 O.D x 40 I.D x 552 L (mm)  

  • Each heating module is separated by insulation material with an air cooling layer, no temperature influences each other

  • Each heating module's temperature is controlled independently up to 1500°C

  • Quick seal flange, vacuum gauge, and flow meter are installed with 8 independent air inlets and outlets on both sides of the furnace, ensuring each channel can be heat treated in a vacuum or atmosphere protection environment.

  • Processing 8 samples with different temperatures at compact space

Heating

Silicon carbide heating element 

160mm heating zone

Working Temp.
  • Continuous Working Temperature 1300° C

  • Maximum Working Temperature 1500°C (< 30 mins)

Gas system & Flange
  • Each channel has a separate intake and outlet system

  • KF25 port for vacuum

  • On the left, there are 8 G1/4 air intakes, 8 globe valves, and 8 float flowmeters (16-160ml/min) to regulate the intake flow.

  • On the right, there are 8 G1/4 air outlets and 4 globe valves

  • 8 sets of water-cooled fast stainless steel flange systems

  • The flange is equipped with a mechanical pressure gauge

  • Quick connecting flange and KF25 port on the front for quick sample access

  • The rear flange has an air inlet and an air outlet, which are respectively connected to the air intake and outlet panels on both sides

  • Max. Vacuum 10^-2 torr by a mechanical pump and 10^-5 torr by turbopump

Temperature Control
  • 8 channel heating tube is controlled independently by 30 segments programmable temperature controller

  • 8 S type Thermal Couples

  • PC control software is included, which can control 8 channel heaters by one Laptop

Heating Rate≤10℃/min
Temperature Accuracy+/- 1°C (Eurotherm controller for +/- 0.1°C)
Power & Working Voltage
  • 18kW, 208 - 240V two-phase, 50/60Hz

  • Two ≥63A air switches needed

  • Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug

Laptop, software (Optional)
  • Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) available at extra cost.

  • Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.

  • A wireless remote control provides up to 300 meters of operating range.

Dimension1540*780*1260mm
Weight~ 500 Kg
Warranty

One year limited with lifetime support --- including all electronic and mechanical parts only.  Damaged parts caused by misuse: such as rusted parts from inadequate storage and broken parts by the user are not covered by the standard warranty.

We reserve the right to upgrade the furnace structure for better performance without notice

Warning &

Application note

Max pressure of this furnace tube is 0.02MPa.  You must install a pressure regulator on your gas tank to avoid being over-pressured. 





DO NOT open the furnace chamber while the Temp. is over 500℃


The  Furnace  is an 8 channels tube furnace with 50mm O.D. and sealing flange for high throughput heat treatment research of alloy and ceramic material up to 1500°C.  It is an excellent tool to research phase diagrams in MGI new generation material.

SPECIFICATIONS:

Furnace Structure
  • The furnace consists of 8 tube furnace modules with quartz tube 50 O.D x 40 I.D x 552 L (mm)  

  • Each heating module is separated by insulation material with an air cooling layer, no temperature influences each other

  • Each heating module's temperature is controlled independently up to 1500°C

  • Quick seal flange, vacuum gauge, and flow meter are installed with 8 independent air inlets and outlets on both sides of the furnace, ensuring each channel can be heat treated in a vacuum or atmosphere protection environment.

  • Processing 8 samples with different temperatures at compact space

Heating

Silicon carbide heating element 

160mm heating zone

Working Temp.
  • Continuous Working Temperature 1300° C

  • Maximum Working Temperature 1500°C (< 30 mins)

Gas system & Flange
  • Each channel has a separate intake and outlet system

  • KF25 port for vacuum

  • On the left, there are 8 G1/4 air intakes, 8 globe valves, and 8 float flowmeters (16-160ml/min) to regulate the intake flow.

  • On the right, there are 8 G1/4 air outlets and 4 globe valves

  • 8 sets of water-cooled fast stainless steel flange systems

  • The flange is equipped with a mechanical pressure gauge

  • Quick connecting flange and KF25 port on the front for quick sample access

  • The rear flange has an air inlet and an air outlet, which are respectively connected to the air intake and outlet panels on both sides

  • Max. Vacuum 10^-2 torr by a mechanical pump and 10^-5 torr by turbopump

Temperature Control
  • 8 channel heating tube is controlled independently by 30 segments programmable temperature controller

  • 8 S type Thermal Couples

  • PC control software is included, which can control 8 channel heaters by one Laptop

Heating Rate≤10℃/min
Temperature Accuracy+/- 1°C (Eurotherm controller for +/- 0.1°C)
Power & Working Voltage
  • 18kW, 208 - 240V two-phase, 50/60Hz

  • Two ≥63A air switches needed

  • Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug

Laptop, software (Optional)
  • Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) available at extra cost.

  • Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.

  • A wireless remote control provides up to 300 meters of operating range.

Dimension1540*780*1260mm
Weight~ 500 Kg
Warranty

One year limited with lifetime support --- including all electronic and mechanical parts only.  Damaged parts caused by misuse: such as rusted parts from inadequate storage and broken parts by the user are not covered by the standard warranty.

We reserve the right to upgrade the furnace structure for better performance without notice

Warning &

Application note

Max pressure of this furnace tube is 0.02MPa.  You must install a pressure regulator on your gas tank to avoid being over-pressured. 





DO NOT open the furnace chamber while the Temp. is over 500℃