The Furnace is a compact 8 channels tube furnace with 20mm O.D. and sealing flange for high throughput heat treatment research of alloy and ceramic material up to 1200°C. t is an excellent tool to research phase diagrams in MGI new generation material.
SPECIFICATIONS:
| Furnace Structure | The furnace consists of 8 small tube furnace modules with quartz tube 20mm O.D. x 17mm I.D. x 192mm L Each heating module is separated by insulation material with air cooling layer, no temperature influence each other Each heating module's temperature is controlled independently up to 1200°C Quick seal flange, vacuum gauge, and flow meter are installed to allow heat treatment under vacuum or flowing gas Processing 8 samples with different temperatures at compact space The furnace system consists of two units: a furnace and a transformer box
|
| Heating Element | NiCrAl alloy wire |
Working Temp. & Constant Temp. Zone | Continuous Working Temperature 1100° C Maximum Working Temperature 1200°C (< 1 hrs) Constant temperature zone:
|
| Processing Tube & Flange | 8 High purity Quartz tubes with 20mm O.D. x 17mm I.D. x 192mm L are included 8 Quickly clamped flange with 1/8 gas inlet and outlet, as well as vacuum ports are built-inc 16 needle valves are optional to connect to the gas inlet and outlet for gas flow control 8 vacuum ports in the back will be connected to the vacuum pump via 8 to 1 adaptor Only one vacuum pump is required via a KF25 port. Max. Vacuum 10^-2 torr by a mechanical pump and 10^-5 torr by turbopump
|
| Temperature Control | The 8-channel heating tube is controlled independently by 8 independent programmable temperature controllers, and integrated into a 7" touch-screen control panel. 8 K type Thermal Couple PC control software is included, which can control 8 channel heaters in one Laptop (optional)
|
| Heating Rate | 10 °C/ min Max. |
| Temperature Accuracy | +/- 1°C |
| Power & Working Voltage | 2.5 KW, 208 - 240V single phase, 50/60Hz (if 4 heating modules operate at the same time ) Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug
|
| Laptop, software (Optional) | Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) available at extra cost. Labview-Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces. A wireless remote control provides up to 300 meters of operating range.
|
| Compliance | CE Certified NRTL (UL61010) or CSA certification is available at an extra cost |
| Dimension / Weight | L 620 x W 400 x H 780 mm / 60 Kg weight |
| Warranty | One-year limited warranty with lifetime support We reserve the right to upgrade the furnace structure for better performance without notice |
Warning & Application note | Max pressure of this furnace is 7.5 PSI (0.5 atm). You must install a pressure regulator on your gas tank to avoid being over-pressured. This furnace also can be modified as a larger CVD furnace system with the proper gas delivery system. Please contact us to discuss your special application
|
The Furnace is a compact 8 channels tube furnace with 20mm O.D. and sealing flange for high throughput heat treatment research of alloy and ceramic material up to 1200°C. t is an excellent tool to research phase diagrams in MGI new generation material.
SPECIFICATIONS:
| Furnace Structure | The furnace consists of 8 small tube furnace modules with quartz tube 20mm O.D. x 17mm I.D. x 192mm L Each heating module is separated by insulation material with air cooling layer, no temperature influence each other Each heating module's temperature is controlled independently up to 1200°C Quick seal flange, vacuum gauge, and flow meter are installed to allow heat treatment under vacuum or flowing gas Processing 8 samples with different temperatures at compact space The furnace system consists of two units: a furnace and a transformer box
|
| Heating Element | NiCrAl alloy wire |
Working Temp. & Constant Temp. Zone | Continuous Working Temperature 1100° C Maximum Working Temperature 1200°C (< 1 hrs) Constant temperature zone:
|
| Processing Tube & Flange | 8 High purity Quartz tubes with 20mm O.D. x 17mm I.D. x 192mm L are included 8 Quickly clamped flange with 1/8 gas inlet and outlet, as well as vacuum ports are built-inc 16 needle valves are optional to connect to the gas inlet and outlet for gas flow control 8 vacuum ports in the back will be connected to the vacuum pump via 8 to 1 adaptor Only one vacuum pump is required via a KF25 port. Max. Vacuum 10^-2 torr by a mechanical pump and 10^-5 torr by turbopump
|
| Temperature Control | The 8-channel heating tube is controlled independently by 8 independent programmable temperature controllers, and integrated into a 7" touch-screen control panel. 8 K type Thermal Couple PC control software is included, which can control 8 channel heaters in one Laptop (optional)
|
| Heating Rate | 10 °C/ min Max. |
| Temperature Accuracy | +/- 1°C |
| Power & Working Voltage | 2.5 KW, 208 - 240V single phase, 50/60Hz (if 4 heating modules operate at the same time ) Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug
|
| Laptop, software (Optional) | Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) available at extra cost. Labview-Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces. A wireless remote control provides up to 300 meters of operating range.
|
| Compliance | CE Certified NRTL (UL61010) or CSA certification is available at an extra cost |
| Dimension / Weight | L 620 x W 400 x H 780 mm / 60 Kg weight |
| Warranty | One-year limited warranty with lifetime support We reserve the right to upgrade the furnace structure for better performance without notice |
Warning & Application note | Max pressure of this furnace is 7.5 PSI (0.5 atm). You must install a pressure regulator on your gas tank to avoid being over-pressured. This furnace also can be modified as a larger CVD furnace system with the proper gas delivery system. Please contact us to discuss your special application
|
