The fusing furnaces in the HT-1200 series are designed for professionals. Closely arranged heating elements protected in quartz glass tubes ensure very good temperature accuracy during fusing or bending on the complete area of the table. All models have an appealing, dual-shell stainless steel housing. The level table surface made from rugged, durable refractory material and the lid opening with gas pressure springs as support simplify charging of the high temperature fusing furnace. The optimized electrical connected load ensures that the glass heats up quickly.
Tmax 950 °C, GF 75: Tmax 900 °C
Heating element, protected in quartz tubes
High current connection capacities for short warm-up times and energy-saving way of working
Arranged closely beside each other on the top, heating elements ensure direct and uniform radiation of the glass
Dual shell hood made of stainless steel with slotted cover lid
Controller integrated to save space on the right side of the furnace
Level table surface with insulation made of robust lightweight refractory bricks and marked charge surface
Top hat insulated with high-quality fiber material; exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
Adjustable, large quick-release fasteners - can be used while working in gloves
Handles on the left and right side of the hood for opening and closing the fusing furnace
Hood safety switch
Solid state relays provide for low-noise operation
Rapid switching cycles result in precise temperature control
Type K thermocouple
Hood easy to open and close, supported by compressed-gas springs
Lockable air inlet opening for ventilation, fast cooling and observation of charge
Robust base on rollers (two of them can be locked down) with tray for glass and tools
Comfortable charging height of 860 mm
Defined application within the constraints of the operating instructions
Motorized lid opening for faster cooling for models GF 380 up
Bottom heating for uniform through heating of large objects
Cooling fan for accelerated cooling with closed lid
Motorized exhaust air flap for faster cooling of the fusing furnace
Air inlet flap with window for observing the glass
Process control and documentation via VCD software package for monitoring, documentation and control
The fusing furnaces in the HT-1200 series are designed for professionals. Closely arranged heating elements protected in quartz glass tubes ensure very good temperature accuracy during fusing or bending on the complete area of the table. All models have an appealing, dual-shell stainless steel housing. The level table surface made from rugged, durable refractory material and the lid opening with gas pressure springs as support simplify charging of the high temperature fusing furnace. The optimized electrical connected load ensures that the glass heats up quickly.
Tmax 950 °C, GF 75: Tmax 900 °C
Heating element, protected in quartz tubes
High current connection capacities for short warm-up times and energy-saving way of working
Arranged closely beside each other on the top, heating elements ensure direct and uniform radiation of the glass
Dual shell hood made of stainless steel with slotted cover lid
Controller integrated to save space on the right side of the furnace
Level table surface with insulation made of robust lightweight refractory bricks and marked charge surface
Top hat insulated with high-quality fiber material; exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
Adjustable, large quick-release fasteners - can be used while working in gloves
Handles on the left and right side of the hood for opening and closing the fusing furnace
Hood safety switch
Solid state relays provide for low-noise operation
Rapid switching cycles result in precise temperature control
Type K thermocouple
Hood easy to open and close, supported by compressed-gas springs
Lockable air inlet opening for ventilation, fast cooling and observation of charge
Robust base on rollers (two of them can be locked down) with tray for glass and tools
Comfortable charging height of 860 mm
Defined application within the constraints of the operating instructions
Motorized lid opening for faster cooling for models GF 380 up
Bottom heating for uniform through heating of large objects
Cooling fan for accelerated cooling with closed lid
Motorized exhaust air flap for faster cooling of the fusing furnace
Air inlet flap with window for observing the glass
Process control and documentation via VCD software package for monitoring, documentation and control
