The construction method of vacuum formed ceramic fiber heater ensures accurate positioning of the coils and eliminates the distortion or other problems connected to the conventional open coil elements in grooves or on tubes. Ceramic fiber heating modules also provide major energy savings in several applications.
Applications of ceramic fiber heater:
Because they can be shaped to fit a variety of furnaces and ovens, ceramic fiber heater are used for everything from heat treating and billet heating, to pipe and duct heating and fluidized beds.
Furnace Type:
Many styles of smaller furnaces, ovens, and kilns, and large furnaces when modules are used in multiples. Can be used with air or process atmospheres.
Material Options:
Nickel/chrome and Kanthal A-1, AF, and APM alloy elements partially or fully embedded in a non-electrically conductive castable ceramic. High temperature will be choose silicon carbide SiC heating elements and Molybdenum disilicide MoSi2 heating elements. Available in flat, cylindrical or semi-cylindrical configurations.
Temperature Range of:
Up to 1800° C. ceramic fiber heater with metallic heating elements and vacuum-formed ceramic fiber insulation for up to 1350°C element temperature.
Power Rating:
As required, depending upon element alloy and module size and configuration.
If by metallic heating elements, the heat source combined with a high temperature insulation allow for high operating temperatures up to 1100°C. Higher temperature ratings up to 1200°C are available in limited designs.
The most type of vacuum formed Ceramic Fiber Heater is 3 type, but we also can do it as per your size and drawing.
Flat Panel Heaters
Cylindrical Heaters
Semi-Cylindrical Heaters
The construction method of vacuum formed ceramic fiber heater ensures accurate positioning of the coils and eliminates the distortion or other problems connected to the conventional open coil elements in grooves or on tubes. Ceramic fiber heating modules also provide major energy savings in several applications.
Applications of ceramic fiber heater:
Because they can be shaped to fit a variety of furnaces and ovens, ceramic fiber heater are used for everything from heat treating and billet heating, to pipe and duct heating and fluidized beds.
Furnace Type:
Many styles of smaller furnaces, ovens, and kilns, and large furnaces when modules are used in multiples. Can be used with air or process atmospheres.
Material Options:
Nickel/chrome and Kanthal A-1, AF, and APM alloy elements partially or fully embedded in a non-electrically conductive castable ceramic. High temperature will be choose silicon carbide SiC heating elements and Molybdenum disilicide MoSi2 heating elements. Available in flat, cylindrical or semi-cylindrical configurations.
Temperature Range of:
Up to 1800° C. ceramic fiber heater with metallic heating elements and vacuum-formed ceramic fiber insulation for up to 1350°C element temperature.
Power Rating:
As required, depending upon element alloy and module size and configuration.
If by metallic heating elements, the heat source combined with a high temperature insulation allow for high operating temperatures up to 1100°C. Higher temperature ratings up to 1200°C are available in limited designs.
The most type of vacuum formed Ceramic Fiber Heater is 3 type, but we also can do it as per your size and drawing.
Flat Panel Heaters
Cylindrical Heaters
Semi-Cylindrical Heaters
