HT-SYJ-150 Digital Low Speed Diamond Saw with Cutting Blades is low-speed diamond saw, which equips with the advanced digital micrometer and a digital speed display controller, it is the perfect tool for cutting/dicing/slicing all kinds of materials up to 32.5 mm thickness, especially for brittle crystals, ceramics, TEM samples, and even plastic samples. Also, this saw can be used for cutting cylindrical cells for failure analysis.

SPECIFICATIONS of Digital Low Speed Diamond Saw with Cutting Blades:

-       Voltage and Power , AC 110V/220V switchable for worldwide usage, 110 VDC Motor

8 A fuse installed

-       Speed Range: Variable 0-600 rpm with LED digital display

-       Cutting Width & Depth

l  The cutting width of the slice is controllable from 1mm ~ 24mm by adjusting the LCD digital micrometer. The LCD micrometer is waterproof with a resolution of 0.001 mm and an accuracy of +/-0.003 mm

l  32.5mm max. cutting depth.

-    Diamond Blades

l  Three blades are included for cutting various materials

l  SiC blade: 4" x 0.35 mm x 0.5" Arbor for cutting nonferrous metal materials, such as super alloys

l  Al2O3 blade: 4" x 0.35 mm x 0.5" Arbor for cutting ferrous metal materials, such as iron and steel

l  Full sintered diamond blade: 4" x 0.35 mm x 0.5" arbor for cutting crystal, ceramic, and plastic materials

l  Optional: For better result, please order our CBN blade & Lube Cool -150 Smart Solid Lubricant for cutting ferrous materials

-       Sample Holder & Mini-vise

Two angles adjustable sample holder is included,

One Mini-vise is included, which can be easily adapted onto the sample holder to clamp rod shape specimens with a diameter up to 1'' max.

-       Warranty  Two years limited with lifetime support (not including rusted parts due to inadequate storage conditions)

-       Application Notes

* Must use anti-corrosion coolant during cutting to avoid rusting the lead screw. Please never use water as the coolant during cutting. You may select our LubeCool-150 lubricant as a coolant which will make the diamond blade cut more efficiently and prevents corrosion. Also, you can use W10-30 motor oil as a coolant, which is available at any auto store

* Please clean the machine after the completion of each use, especially the lead screw using WD-40 lubricant (1 can include) after each use. Make sure the X, Y, and Z axes can move freely without blocking and rusting

* Applications on various materials

* Using spacers to make gang saw, you may section multi-sample in one time.

-       Warning   of Digital Low Speed Diamond Saw with Cutting Blades

* It is required to use proper cutting fluid with the saw to prevent corrosion of the machine components. We strongly recommend you use an oil-based coolant or lube cool lubricant with the water. Please do not use tap water directly

* Never cut any materials without the use of proper cutting fluid. If you do so, serious damages can be caused by the spooler driving mechanism

* For cutting the sticky materials such as non-ferrous alloy, epoxy, and plastic, you must sharpen the diamond blade frequently. We suggest that cutting sample along with the included dressing stone (Glue sample and the dressing stone side by side and cut them together, this process will help keep the blade sharp enough for efficient cutting

* The saw can be used inside a glove box with N2 gas, but no Ar gas