ZHENGZHOU HENGTONG FURNACE CO,. LTD
2100C Small CZ Industrial Crystal Grower System Machine
  • 2100C Small CZ Industrial Crystal Grower System Machine
  • 2100C Small CZ Industrial Crystal Grower System Machine
0 1

2100C Small CZ Industrial Crystal Grower System Machine

This is a small-scale Czochralski (CZ)Crystal Growth Furnacefor metals and oxides with a diameter < 1". It has been proven excellent for pulling various crystals with up to 2100C, including Al2O3, GGG, YAG, LaAlO3, Si, Ge, etc. We provides technical training on installing and operating before shipping, also provides online video technical support worldwide.


Specifications

Power

Input:208V or 380V,3 Phase,50A(max induction power),50/60Hz

Max.Temperature

2100C with induction heating

Vacuum Chamber

Material:SS304

Size: Φ320×320mm, equipped with a quartz window (Φ120mm) to observe material melting, crystal seeding, and growth. 

There is one KF25 port and one KF40 vacuum port connected to the back of the chamber.There is also one LF160 port on the right side of the chamber for molecular pump system connecting.

Pulling Mechanism

The pulling mechanism is driven by a precision servo motor/n

Pulling Speed:0.1-10mm/hr

Pulling rod rotation speed:0.1-23rpm

Travel Distance:0-300mm

The pulling mechanism can move as quickly as 35mm/min

Vacuum atmosphere

The vacuum chamber can be evacuated and filled with inert gases.

Equipped with a digital anti-corrosion vacuum gauge.

Vacuum level:5×10-5 torr or 5×10-2 torr

Induction Heating

25KW(30-80KHz)induction power supply with Time Controller and Power Controller.

Induction coil116L/min circulating water chiller is not included.

The crucible and thermal insulation accessories are not included.

Control Panel

Touch screen control panel controlInduction powerPulling speedRotating speed

Dimension

900mm(L)*1100mm(W)*2100mm(H)

Warranty

One-year limited warranty.

 

Attention:When performing heating operations, the heating power should be gradually increased to avoid sudden increases that may cause equipment damage or crystal growth failure. During the heating process, closely monitor the temperature changes to ensure that the temperature meets the requirements before proceeding with crystal growth operations. If the temperature is abnormal, adjust the heating power or stop the equipment operation in a timely manner.

 


This is a small-scale Czochralski (CZ)Crystal Growth Furnacefor metals and oxides with a diameter < 1". It has been proven excellent for pulling various crystals with up to 2100C, including Al2O3, GGG, YAG, LaAlO3, Si, Ge, etc. We provides technical training on installing and operating before shipping, also provides online video technical support worldwide.


Specifications

Power

Input:208V or 380V,3 Phase,50A(max induction power),50/60Hz

Max.Temperature

2100C with induction heating

Vacuum Chamber

Material:SS304

Size: Φ320×320mm, equipped with a quartz window (Φ120mm) to observe material melting, crystal seeding, and growth. 

There is one KF25 port and one KF40 vacuum port connected to the back of the chamber.There is also one LF160 port on the right side of the chamber for molecular pump system connecting.

Pulling Mechanism

The pulling mechanism is driven by a precision servo motor/n

Pulling Speed:0.1-10mm/hr

Pulling rod rotation speed:0.1-23rpm

Travel Distance:0-300mm

The pulling mechanism can move as quickly as 35mm/min

Vacuum atmosphere

The vacuum chamber can be evacuated and filled with inert gases.

Equipped with a digital anti-corrosion vacuum gauge.

Vacuum level:5×10-5 torr or 5×10-2 torr

Induction Heating

25KW(30-80KHz)induction power supply with Time Controller and Power Controller.

Induction coil116L/min circulating water chiller is not included.

The crucible and thermal insulation accessories are not included.

Control Panel

Touch screen control panel controlInduction powerPulling speedRotating speed

Dimension

900mm(L)*1100mm(W)*2100mm(H)

Warranty

One-year limited warranty.

 

Attention:When performing heating operations, the heating power should be gradually increased to avoid sudden increases that may cause equipment damage or crystal growth failure. During the heating process, closely monitor the temperature changes to ensure that the temperature meets the requirements before proceeding with crystal growth operations. If the temperature is abnormal, adjust the heating power or stop the equipment operation in a timely manner.