ZHENGZHOU HENGTONG FURNACE CO,. LTD
Melt Spinner With Water Cold Copper Wheel and Temperature Control System upto 500g
  • Melt Spinner With Water Cold Copper Wheel and Temperature Control System upto 500g
  • Melt Spinner With Water Cold Copper Wheel and Temperature Control System upto 500g
0 1

Melt Spinner With Water Cold Copper Wheel and Temperature Control System upto 500g

The Melt Spinner system features an SS air-tight chamber with a front observation window. A dual-stage oil pump is included for achieving a high vacuum (up to 10^-2 Torr). ISO 160 flange reserved for turbopump connection if necessary. The unit provides inlet and outlet valves for inert gas purging, which could avoid moisture and oxygen exposure while processing the melt spinning. The user can also control the speed of the wheel, the induction heating power, the temperature, and the pressure applied in melt spinning.

Specifications:

Features

A complete system consists of a stainless-steel vacuum chamber, a mechanical (or turbo) pump, a 15 kW induction heating system, a rack system, and a one-meter long discharging tubular collector.

Copper flywheel with a maximum of 50 m/s (300mm Dia. Copper Wheel @ 2850 RPM) spinning speed.

The distance between the crucible and copper wheel is adjustable (electrical adjustment via servo motor).

Large LCD touchscreen control for temperature & induction power, copper wheel spinning speed & on/off, mechanical & turbopump on/off, solenoid valves for pump isolation and gas purging, melt-spinning on/off, and pressure monitoring.

Maximum melting capacity around 500 g per batch (Note: material melting point < 1000°C).

Thermocouple inserts to the bottom of the crucible which can measure the temperature of the crucible. (NOTE: directly contacting the thermocouple with the melt should be avoided.)

Featured a position adjustable “scraper” can prevent ribbon spin-off to the inside of the chamber.

Power Requirements

Input Voltage: 220 VAC, three-phase, 60Hz.

Input Power: 25 kW (A 70A breaker is required).

Vacuum Chamber &

Vacuum Pump

Vacuum chamber: 500 × 550 × 700 mm (L × W × H).

Hinged type door with a quartz observation window and illumination lighting which provide better sight viewing of the process condition inside of the chamber.

Mechanical pump with KF40 port which can evacuate to approximately 5×10-2 Torr within 30 minutes.

High vacuum level 10-6 Torr (with an optional turbopump, which is not included).

ISO-160 vacuum flange is reserved for turbopump connection.

Induction Heater & Temp. Control

Dual station: 25 kW induction heater.

Boron nitride crucible (optional).

Maximum sample load: 150 – 500 g (material melting point < 1000°C, based on NdFeB.

Crucible temperature, dwell time, and ejection time can be controlled automatically by the controller.

The temperature controller is integrated with a thermocouple (24” long) inserting into the crucible wall.

30 programmable segments of temperature profile with ± 2 °C accuracy.

Crucibles ( Optional )

We recommend using BN crucible for Ferro metallic material   < 1200°C, which is not included

The customized BN crucible is also available upon request

Gas Pressure Regulator

PID pressure regulator is included to precisely control the pressurized gas applied to the crucible for pushing the molten out from the slit.

Pneumatic solenoid valves are used to isolate the pumps from the chamber when not used, chamber purging, and pressure relief.

Optional

The Casting attachment is available upon request at extra cost.

Customized water-cooling copper mold is available upon request.

Vacuum casting mold is available upon request Φ120X90mm at the additional cost.

Water chiller is available at additional cos.

The spinner may be connected with a dual glovebox for  air-sensitive materials

Footprint

2120 × 1100 × 2000 mm (L × W × H).

Chamber: 500 × 550 × 700 mm (L × W × H).

Warranty

One-year limited warranty with lifetime support.


Specifications:

Features

A complete system consists of a stainless-steel vacuum chamber, a mechanical (or turbo) pump, a 15 kW induction heating system, a rack system, and a one-meter long discharging tubular collector.

Copper flywheel with a maximum of 50 m/s (300mm Dia. Copper Wheel @ 2850 RPM) spinning speed.

The distance between the crucible and copper wheel is adjustable (electrical adjustment via servo motor).

Large LCD touchscreen control for temperature & induction power, copper wheel spinning speed & on/off, mechanical & turbopump on/off, solenoid valves for pump isolation and gas purging, melt-spinning on/off, and pressure monitoring.

Maximum melting capacity around 500 g per batch (Note: material melting point < 1000°C).

Thermocouple inserts to the bottom of the crucible which can measure the temperature of the crucible. (NOTE: directly contacting the thermocouple with the melt should be avoided.)

Featured a position adjustable “scraper” can prevent ribbon spin-off to the inside of the chamber.

Power Requirements

Input Voltage: 220 VAC, three-phase, 60Hz.

Input Power: 25 kW (A 70A breaker is required).

Vacuum Chamber &

Vacuum Pump

Vacuum chamber: 500 × 550 × 700 mm (L × W × H).

Hinged type door with a quartz observation window and illumination lighting which provide better sight viewing of the process condition inside of the chamber.

Mechanical pump with KF40 port which can evacuate to approximately 5×10-2 Torr within 30 minutes.

High vacuum level 10-6 Torr (with an optional turbopump, which is not included).

ISO-160 vacuum flange is reserved for turbopump connection.

Induction Heater & Temp. Control

Dual station: 25 kW induction heater.

Boron nitride crucible (optional).

Maximum sample load: 150 – 500 g (material melting point < 1000°C, based on NdFeB.

Crucible temperature, dwell time, and ejection time can be controlled automatically by the controller.

The temperature controller is integrated with a thermocouple (24” long) inserting into the crucible wall.

30 programmable segments of temperature profile with ± 2 °C accuracy.

Crucibles ( Optional )

We recommend using BN crucible for Ferro metallic material   < 1200°C, which is not included

The customized BN crucible is also available upon request

Gas Pressure Regulator

PID pressure regulator is included to precisely control the pressurized gas applied to the crucible for pushing the molten out from the slit.

Pneumatic solenoid valves are used to isolate the pumps from the chamber when not used, chamber purging, and pressure relief.

Optional

The Casting attachment is available upon request at extra cost.

Customized water-cooling copper mold is available upon request.

Vacuum casting mold is available upon request Φ120X90mm at the additional cost.

Water chiller is available at additional cos.

The spinner may be connected with a dual glovebox for  air-sensitive materials

Footprint

2120 × 1100 × 2000 mm (L × W × H).

Chamber: 500 × 550 × 700 mm (L × W × H).

Warranty

One-year limited warranty with lifetime support.