HT-200S is a benchtop vacuum melt spinning system for preparing amorphous metallic ribbons up to 2000ºC. In this technique, metal ingots are melted via the induction heating method and then propelled by overpressurizing the crucible. A thin stream of molten is then dropped onto a fast-spinning surface of a cold copper drum. This causes rapid quenching & solidification of the molten and thus form the ribbon (< 10 mm width) of the liquid metal alloy.
SPECIFICATIONS:
Features | l The 15 KW ( 220VAC, Three phases) induction heating system for worldwide use. l Treating materials with melting points up to ~ 2000°C with 10 - 20g Max l 200mm diameter copper flywheel with max. 31 meters /sec. spinning speed l Crucible to copper wheel distance adjustable 0~10mm (manual adjustment) l Vacuum casting attachment is included as a great add-on to make the casting part l Compact dimension for space-saving |
Power | l 15 KW Induction Heater for melting point < 1500°C l Voltage: 208- 240VAC, Three Phases, 50/60 Hz l Input Current: 42 Amp l Frequency: 30 - 80 kHz |
Control Station | l All functional controls in one digital panel: Temperature & induction power control, copper drum spinning speed & ON/OFF of Mechanical & Turbo Pump, solenoid valves for pump isolation and gas purging, and Melt-Spinning. |
Vacuum Chamber | l Stainless steel vacuum chamber: 300 x 300 x 480 mm l Hinged type door with quartz observation window (120mm dia.) l Vacuum level: 5 e-5 torr within 30 minutes by turbopump l KF40 and ISO100-K vacuum port is built to the chamber. |
Induction Heater | l Induction Heater: l Desktop 15KW Induction Heater, 30 - 80kHz (Standard) l High Frequency 10 KW Induction Heater, 80 - 200kHz (available at extra cost) l Max. sample load: 5 - 20g (Fe based ) l Max. working temperature: 2000°C l The temperature controller with Thermocouple is not available. Coils with different sizes are available optionally l Note: Water cooling for the induction heater is needed |
Crucibles | l Two quartz crucibles with an orifice of 0.5 - 1mm dia. are included for materials of melting point < 1200ºC l Customized crucibles made of quartz or BN are available upon request at extra cost l Optional graphite casing assembly (graphite casing+quartz insulation+larger induction coil in diameter) are also available upon request at extra cost for refractory and low permeability materials (such as Cu, BiTe, and GaAs) |
Spinning Wheel | l Copper flywheel without water cooling (200 mm Dia. x 40 mm W) l 0 - 31 m/s adjustable l Max. Speed: 3000 RPM l Max. Ribbon width: 12 mm (depended on the nozzle of crucible) l The water-cooling wheel is available upon request with extra cost l The attachment for casting is available upon request at an extra cost |
Collecting Drum | l Spun and solidified material is collected by the vacuum-sealed drum. l Collector Length: 300 mm l The extended length of the cylinder is available at an extra cost |
Optional | l A water-chiller is required but not included l The melt spinner may connect to a glovebox to handle air-sensitive material. l Sample transforming from glovebox to melt-spinner chamber is available upon request. |
Dimension | l 1240 L x 680 W x 780 H, mm |
Warranty | l One-year limited warranty with lifetime support |
The system features an SS air-tight chamber with a front observation window. A turbo backed by a dual-stage oil pump is optional for achieving a high vacuum up to 10^-6 torr. The unit provides inlet and outlet valves for inert gas purging. This helps to protect samples from moisture or oxygen exposure during the melt spinning process. The user can also control the RPM of the drum, induction heating power, temperature, and pressure applied to the crucible.
SPECIFICATIONS:
Features | l The 15 KW ( 220VAC, Three phases) induction heating system for worldwide use. l Treating materials with melting points up to ~ 2000°C with 10 - 20g Max l 200mm diameter copper flywheel with max. 31 meters /sec. spinning speed l Crucible to copper wheel distance adjustable 0~10mm (manual adjustment) l Vacuum casting attachment is included as a great add-on to make the casting part l Compact dimension for space-saving |
Power | l 15 KW Induction Heater for melting point < 1500°C l Voltage: 208- 240VAC, Three Phases, 50/60 Hz l Input Current: 42 Amp l Frequency: 30 - 80 kHz |
Control Station | l All functional controls in one digital panel: Temperature & induction power control, copper drum spinning speed & ON/OFF of Mechanical & Turbo Pump, solenoid valves for pump isolation and gas purging, and Melt-Spinning. |
Vacuum Chamber | l Stainless steel vacuum chamber: 300 x 300 x 480 mm l Hinged type door with quartz observation window (120mm dia.) l Vacuum level: 5 e-5 torr within 30 minutes by turbopump l KF40 and ISO100-K vacuum port is built to the chamber. |
Induction Heater | l Induction Heater: l Desktop 15KW Induction Heater, 30 - 80kHz (Standard) l High Frequency 10 KW Induction Heater, 80 - 200kHz (available at extra cost) l Max. sample load: 5 - 20g (Fe based ) l Max. working temperature: 2000°C l The temperature controller with Thermocouple is not available. Coils with different sizes are available optionally l Note: Water cooling for the induction heater is needed |
Crucibles | l Two quartz crucibles with an orifice of 0.5 - 1mm dia. are included for materials of melting point < 1200ºC l Customized crucibles made of quartz or BN are available upon request at extra cost l Optional graphite casing assembly (graphite casing+quartz insulation+larger induction coil in diameter) are also available upon request at extra cost for refractory and low permeability materials (such as Cu, BiTe, and GaAs) |
Spinning Wheel | l Copper flywheel without water cooling (200 mm Dia. x 40 mm W) l 0 - 31 m/s adjustable l Max. Speed: 3000 RPM l Max. Ribbon width: 12 mm (depended on the nozzle of crucible) l The water-cooling wheel is available upon request with extra cost l The attachment for casting is available upon request at an extra cost |
Collecting Drum | l Spun and solidified material is collected by the vacuum-sealed drum. l Collector Length: 300 mm l The extended length of the cylinder is available at an extra cost |
Optional | l A water-chiller is required but not included l The melt spinner may connect to a glovebox to handle air-sensitive material. l Sample transforming from glovebox to melt-spinner chamber is available upon request. |
Dimension | l 1240 L x 680 W x 780 H, mm |
Warranty | l One-year limited warranty with lifetime support |
The system features an SS air-tight chamber with a front observation window. A turbo backed by a dual-stage oil pump is optional for achieving a high vacuum up to 10^-6 torr. The unit provides inlet and outlet valves for inert gas purging. This helps to protect samples from moisture or oxygen exposure during the melt spinning process. The user can also control the RPM of the drum, induction heating power, temperature, and pressure applied to the crucible.
