HT-1650C is a 1650°C max. Bridgman furnace for directional solidification and single crystal growth with a boule size up to Ø37mm.The vertical furnace has three independently controlled heating zones with a total heating length of 300 mm to set up different temperature gradients for crystal growth.STA-1650C keeps the melt stationary while moving the furnace up to control the temperature gradient, ensuring the stability of the growth interface.
Specifications:
Advanced Features | l Three (3) independently controlled heating zones for temperature gradient tuning. l φ42mm Alumina sample pulling stage with TC attachment for accurate temperature monitoring of the crucible at the bottom. l Electric elevated crucible stage enables an automatic and convenient sample loading/retrieving; |
Power Requirements | l 220VAC single phase 50/60Hz l 9.5KW |
Working Temperature | l Heating Element: Silicon molybdenum rod l Max. Working Temperature: 1700°C ( <1hr) l Continuous Operating Temperature: 1600°C |
Processing Tube & Flange | l High purity alumina furnace tube, Size: φ80mm O.D. x 74 mm ID x 1000mm L l A pair of stainless steel flange is connected to both end of the processing tube which allows for inert gas purging or vacuum during the crystal growing process |
Sample Stage | l φ42X40mm H Alumina Sample Stage l B type thermocouple insert from the bottom of the sample stage for accurate temperature measurement of the crucible |
Crucible Retrieving Mechanism | l Automatic sample retrieving system for easy crucible loading/unloading, l 700mm max. travel distance |
Heating Zones | l Three heating zones with independent temperature measurement and control l Three zones: 300mm (12") long in total, 100mm long for each zone. |
Temperature Control | l Three EPC 3004 Eurotherm temperature controller with 28 programmable segments for precise control of heating, cooling, and dwelling rate. l Built-in overheating & broken thermocouple protection. l European Temperature controller, with +/- 0.1 ºC temperature accuracy. l Three B type thermocouples (one for each zone). |
Cooling Fans | l One speed adjustable cooling fans are installed at the bottom exit of the furnace |
Furnace Travel Distance & Speed | l As the furnace heater moves upward, the crucible is moving toward the bottom exit of the furnace where the lower temperature is seen. l The maximum travel distance of the furnace heater is 200 mm. l Travel speed: 0.03-3 mm/hr |
Vacuum Pump (Not included) | l 10E-2 torr via dual-stage mechanical vacuum pump l 10E-5 torr via Turbopump l The vacuum pump is optional. l For oxygen-sensitive material, suggest using recirculating gas purification system ( < 1 ppm) to replace turbopump |
Dimension | l Controller stage: 860mm L x 600mm W x 1220mm H l Furnace stage: 1170mm L X 910mm W X 2500mm H |
Shipping Weight & Dimensions | l 1) 3225 lbs, 83x48x86" l 2) 751 lbs, 49x41x58" |
The crystal growth furnace is suitable for Bridgman method (crucible descent method), crystal growth under vacuum, protective atmosphere, or oxidizing atmosphere.
Crystal Growth furnaces are used to grow high-quality single crystals with uniform properties and low defect density.
Specifications:
Advanced Features | l Three (3) independently controlled heating zones for temperature gradient tuning. l φ42mm Alumina sample pulling stage with TC attachment for accurate temperature monitoring of the crucible at the bottom. l Electric elevated crucible stage enables an automatic and convenient sample loading/retrieving; |
Power Requirements | l 220VAC single phase 50/60Hz l 9.5KW |
Working Temperature | l Heating Element: Silicon molybdenum rod l Max. Working Temperature: 1700°C ( <1hr) l Continuous Operating Temperature: 1600°C |
Processing Tube & Flange | l High purity alumina furnace tube, Size: φ80mm O.D. x 74 mm ID x 1000mm L l A pair of stainless steel flange is connected to both end of the processing tube which allows for inert gas purging or vacuum during the crystal growing process |
Sample Stage | l φ42X40mm H Alumina Sample Stage l B type thermocouple insert from the bottom of the sample stage for accurate temperature measurement of the crucible |
Crucible Retrieving Mechanism | l Automatic sample retrieving system for easy crucible loading/unloading, l 700mm max. travel distance |
Heating Zones | l Three heating zones with independent temperature measurement and control l Three zones: 300mm (12") long in total, 100mm long for each zone. |
Temperature Control | l Three EPC 3004 Eurotherm temperature controller with 28 programmable segments for precise control of heating, cooling, and dwelling rate. l Built-in overheating & broken thermocouple protection. l European Temperature controller, with +/- 0.1 ºC temperature accuracy. l Three B type thermocouples (one for each zone). |
Cooling Fans | l One speed adjustable cooling fans are installed at the bottom exit of the furnace |
Furnace Travel Distance & Speed | l As the furnace heater moves upward, the crucible is moving toward the bottom exit of the furnace where the lower temperature is seen. l The maximum travel distance of the furnace heater is 200 mm. l Travel speed: 0.03-3 mm/hr |
Vacuum Pump (Not included) | l 10E-2 torr via dual-stage mechanical vacuum pump l 10E-5 torr via Turbopump l The vacuum pump is optional. l For oxygen-sensitive material, suggest using recirculating gas purification system ( < 1 ppm) to replace turbopump |
Dimension | l Controller stage: 860mm L x 600mm W x 1220mm H l Furnace stage: 1170mm L X 910mm W X 2500mm H |
Shipping Weight & Dimensions | l 1) 3225 lbs, 83x48x86" l 2) 751 lbs, 49x41x58" |
The crystal growth furnace is suitable for Bridgman method (crucible descent method), crystal growth under vacuum, protective atmosphere, or oxidizing atmosphere.
Crystal Growth furnaces are used to grow high-quality single crystals with uniform properties and low defect density.
