HT vacuum pressing furnace is ideally suited for firing of conventional ceramic veneers under normal atmosphere or vacuum but also for processing of all common pressing ceramics. The all-round heating of the vacuum furnace chamber results in a very even temperature uniformity and enables fast heat-up times.
HT vacuum pressing furnace is ideally suited for firing of conventional ceramic veneers under normal atmosphere or vacuum but also for processing of all common pressing ceramics. The all-round heating of the vacuum furnace chamber results in a very even temperature uniformity and enables fast heat-up times. The lowerable, electric motor-driven lifting table ensures easy and convenient handling for the pressing process.
A highlight is the especially developed controller D580 with colourful, high-contrast 6. 8 inch touch display. It enables intuitive program input on the large touch screen. Programs can be displayed graphically and in tabular form. The vacuum pressing furnace is freely programmable. Many manufacturer programs can be downloaded free of charge from the program portal on the website and loaded into the controller.
Tmax 1200 °C for pressing furnace
Evacuation possibility for processes in vacuum
High-quality, free-radiating heating elements
Very good temperature uniformity due to all-round heating of the vacuum furnace chamber
Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumina silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
Stainless steel shelf for tools, tweezers, pliers & and firing tray, can be mounted to the left or right side of the vacuum pressing furnace.
Precise, motorized toothed belt drive of the table with button operation, program controlled opening for cooling possible
Pneumatic press drive via compressed air
Pressing pressure adjustable
Due to generously dimensioned heating capacity and low storage heat, short process times can be realised
Thermocouple type S
Scope of delivery includes a starter set incl. firing tray with ceramic pins for exact positioning of the firing objects, tweezers, silver sample set for temperature calibration
Controller with touch operation D580 specially developed for the process of firing with preset manufacturer programs
Free download of all common firing programs and pressing programs for easy program import via USB stick into the controller without registering a user account
Defined application within the constraints of the operating instructions
HT vacuum pressing furnace is ideally suited for firing of conventional ceramic veneers under normal atmosphere or vacuum but also for processing of all common pressing ceramics. The all-round heating of the vacuum furnace chamber results in a very even temperature uniformity and enables fast heat-up times. The lowerable, electric motor-driven lifting table ensures easy and convenient handling for the pressing process.
A highlight is the especially developed controller D580 with colourful, high-contrast 6. 8 inch touch display. It enables intuitive program input on the large touch screen. Programs can be displayed graphically and in tabular form. The vacuum pressing furnace is freely programmable. Many manufacturer programs can be downloaded free of charge from the program portal on the website and loaded into the controller.
Tmax 1200 °C for pressing furnace
Evacuation possibility for processes in vacuum
High-quality, free-radiating heating elements
Very good temperature uniformity due to all-round heating of the vacuum furnace chamber
Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumina silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
Stainless steel shelf for tools, tweezers, pliers & and firing tray, can be mounted to the left or right side of the vacuum pressing furnace.
Precise, motorized toothed belt drive of the table with button operation, program controlled opening for cooling possible
Pneumatic press drive via compressed air
Pressing pressure adjustable
Due to generously dimensioned heating capacity and low storage heat, short process times can be realised
Thermocouple type S
Scope of delivery includes a starter set incl. firing tray with ceramic pins for exact positioning of the firing objects, tweezers, silver sample set for temperature calibration
Controller with touch operation D580 specially developed for the process of firing with preset manufacturer programs
Free download of all common firing programs and pressing programs for easy program import via USB stick into the controller without registering a user account
Defined application within the constraints of the operating instructions
