HTVF-1650-A Atmosphere Box Furnace is an ideal tool for sintering new materials under inert gas or oxygen atmosphere up to 1650 ºC. this vacuum atmosphere furnace consists of high-quality alumina fiber bricks and two sides MoSi2l heating elements with a vacuum-sealed steel case with a water cooling jacket.
HTVF-1650-A Atmosphere Box Furnace is an ideal tool for sintering new materials under inert gas or oxygen atmosphere up to 1650 ºC with a chamber dimension of 400x400x400 mm. this vacuum atmosphere furnace consists of high-quality alumina fiber bricks and two sides MoSi2l heating elements with a vacuum-sealed steel case with a water cooling jacket.
Furnace Structure | The refractory muffle is built-in with a water-cooling wall with dimension 470 LX 410W X 550H (mm), which can stand at positive pressure up to 0.06Mpa and vacuum up to - 0.09Mpa. Built-in pressure gauge, vacuum valves, and one gas float meters MoSi2 heating elements for working in both inert gas and oxygen environment up to 1600oC Two digital temperature controllers for controlling and monitoring furnace running at safety |
Inside Chamber | Heated chamber: 400x400x400 mm (16x16x16 inch), 65 Liter (Max) Energy-saving 1800-grade fibrous alumina insulation Sealed by stainless steel with water cooling Two sides heating (Left and right) to ensure the best temperature uniformity. SiC plate is installed on the bottom, which has 100kg, Max. loading |
Power | AC 208 - 240V, three phases (50/60 Hz). 400 or 480VAC is also available upon request. 36 KW 80 Amp (100 Amp air breaker is required) 9' Power cable is included without a plug. Suggest you install the power plug according to your lab power panel by a local electrician. |
Working Temperature & Heating Rate | Continuous: 800°C - 1600°C Max. 1650°C (< 2 hr) Heating Rate: 10°C / min max. Temp. Accuracy: +/- 1°C |
Heating Elements | 12 sets of MoSi2 coils heating elements are built-in both sides of the chamber and replaceable The heating element is consumable parts that should be ordered separately if an extra set of heating elements is required. MoSi2 heating elements can be heated both in inert gas and air |
Temperature Controllers | Two temperature controllers and thermocouples (T/C) are built-in the furnace The primary controller and thermocouple dominate the user-defined heating program and the main alarm system with +/- 1oC accuracy and 30 segments of programmable. The monitoring controller only monitors the real temperature by the other thermocouple and activates the secondary alarm system when the failure of primary controller to ensure safety. |
Gas Flow Control and Vacuum | Gas Flow Control and Vacuum Valve one large flowmeter (12L/min) is installed in the front panel o KF40 vacuum port with the valve is built-in to connect a vacuum pump The Heavy-duty vacuum pump is included. Please click the Pic. left to see specs |
Water Cooling | A 16L/min recirculating water chiller is included for the cooling air-tight chamber and the front door. |
Overall Dimensions | 914 L X 914W X 1897 mm |
Shipping Weight | 750 kg |
Warranty | One-year limited warranty with lifetime support. (Consumables including heating elements and O-rings are not covered by the warranty, please order the replacement at related products below.) |
HTVF-1650-A Atmosphere Box Furnace is an ideal tool for sintering new materials under inert gas or oxygen atmosphere up to 1650 ºC with a chamber dimension of 400x400x400 mm. this vacuum atmosphere furnace consists of high-quality alumina fiber bricks and two sides MoSi2l heating elements with a vacuum-sealed steel case with a water cooling jacket.
Furnace Structure | The refractory muffle is built-in with a water-cooling wall with dimension 470 LX 410W X 550H (mm), which can stand at positive pressure up to 0.06Mpa and vacuum up to - 0.09Mpa. Built-in pressure gauge, vacuum valves, and one gas float meters MoSi2 heating elements for working in both inert gas and oxygen environment up to 1600oC Two digital temperature controllers for controlling and monitoring furnace running at safety |
Inside Chamber | Heated chamber: 400x400x400 mm (16x16x16 inch), 65 Liter (Max) Energy-saving 1800-grade fibrous alumina insulation Sealed by stainless steel with water cooling Two sides heating (Left and right) to ensure the best temperature uniformity. SiC plate is installed on the bottom, which has 100kg, Max. loading |
Power | AC 208 - 240V, three phases (50/60 Hz). 400 or 480VAC is also available upon request. 36 KW 80 Amp (100 Amp air breaker is required) 9' Power cable is included without a plug. Suggest you install the power plug according to your lab power panel by a local electrician. |
Working Temperature & Heating Rate | Continuous: 800°C - 1600°C Max. 1650°C (< 2 hr) Heating Rate: 10°C / min max. Temp. Accuracy: +/- 1°C |
Heating Elements | 12 sets of MoSi2 coils heating elements are built-in both sides of the chamber and replaceable The heating element is consumable parts that should be ordered separately if an extra set of heating elements is required. MoSi2 heating elements can be heated both in inert gas and air |
Temperature Controllers | Two temperature controllers and thermocouples (T/C) are built-in the furnace The primary controller and thermocouple dominate the user-defined heating program and the main alarm system with +/- 1oC accuracy and 30 segments of programmable. The monitoring controller only monitors the real temperature by the other thermocouple and activates the secondary alarm system when the failure of primary controller to ensure safety. |
Gas Flow Control and Vacuum | Gas Flow Control and Vacuum Valve one large flowmeter (12L/min) is installed in the front panel o KF40 vacuum port with the valve is built-in to connect a vacuum pump The Heavy-duty vacuum pump is included. Please click the Pic. left to see specs |
Water Cooling | A 16L/min recirculating water chiller is included for the cooling air-tight chamber and the front door. |
Overall Dimensions | 914 L X 914W X 1897 mm |
Shipping Weight | 750 kg |
Warranty | One-year limited warranty with lifetime support. (Consumables including heating elements and O-rings are not covered by the warranty, please order the replacement at related products below.) |
