HT-1200-BF is a compact and economic 1200ºC Maximum Bridgman crystal growth furnace with a single zone high temperature tube furnace mounted at the bottom, and the pulling device mounted on top,which is designed for growing small size crystal under control atmosphere or sealed quartz crucible at low cost.
Pledge: genuine guarantee,speed refund,gift insurance,seven days no reason to return
The Bridgman furnace is designed with a single zone high temperature tube furnace mounted at the bottom, and the pulling device mounted on top. The base frame can be utilized with almost all of our tube furnaces, so a lot of different lengths, diameters and temperatures are available. Multi-zone Bridgman furnaces are available as well, permitting a better influence on the temperature profile.
SPECIFICATIONS:
Vertical Two Zone Tube Furnace | l Compact two zones split vertical tube furnace l Working Voltage: 110V AC or 220V selectable l Max. Power Consumption: 1.5 KW l Two Heating Zone: 100 mm L for each Zone, 200 mm L in total l Max. heating temperature: 1200°C l Continuous working temperature: 1100°C l Two programmable digital temperature controllers which control two heating zone independently l Max. Temperature gradient: 1ºC/Cm ① Finding a suitable thermal gradient is user responsibility ② Adjusting two heating zone's temperature can create different thermal gradient profile ③ Adjusting furnace opening diameter also can change the thermal gradient |
Hanging wire | l One set of Ni-SS hanging wire is included (pic to the left). Max. working temperature is 800C. l Optional hanging wire for higher working temperature is available upon request: ① Ni-Cr-Al wire (not included) Max. working temperature < 1100°C ② Platinium wire (not included) Max.working temperature > 1200°C and < 1600°C l A thin hanging wire goes through the top flange. A positive inert gas can keep processing tube under controlled atmosphere l For air-sensitive material, the sample shall be sealed in a small quartz tube with pre-vacuumed as Pic below right |
Motor and Controller | l 6"L x 4"W Touch Screen l Wire descending speed is programmable within 3 segments. l Precise DC step motor controls traveling speed. l Pulling speed range: 1-500 um/sec adjustable with the accuracy of +/- 0.05% l Total stoke length controlled by touch screen: 350mm l Power: 50W, 110V - 240VC l Optional:Lower speed range is available upon request at extra cost. |
Product Dimensions | l 520mm (L) x 430mm (W) x 1100mm (H) |
Laptop, software & WiFi Control (Optional) | l Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) l Labview Based Temperature Control System enables the user to edit temperature profile, manage heat-treatment recipe, record and plot data for STAI furnaces l A wireless remote control provides up to 300 meters operating range |
Warranty | l One-Year limited warranty with lifetime support l Consumable parts such as processing tubes, O-rings, and heating elements are not covered by the warranty |
Net Weight | l 105 kg (230 lbs) |
Shipping Weight | l 137 kg (300 lbs) |
Shipping Dimensions | l 48"(L) x 40"(W) x 68"(H) |
The Bridgman furnace is designed with a single zone high temperature tube furnace mounted at the bottom, and the pulling device mounted on top. The base frame can be utilized with almost all of our tube furnaces, so a lot of different lengths, diameters and temperatures are available. Multi-zone Bridgman furnaces are available as well, permitting a better influence on the temperature profile.
SPECIFICATIONS:
Vertical Two Zone Tube Furnace | l Compact two zones split vertical tube furnace l Working Voltage: 110V AC or 220V selectable l Max. Power Consumption: 1.5 KW l Two Heating Zone: 100 mm L for each Zone, 200 mm L in total l Max. heating temperature: 1200°C l Continuous working temperature: 1100°C l Two programmable digital temperature controllers which control two heating zone independently l Max. Temperature gradient: 1ºC/Cm ① Finding a suitable thermal gradient is user responsibility ② Adjusting two heating zone's temperature can create different thermal gradient profile ③ Adjusting furnace opening diameter also can change the thermal gradient |
Hanging wire | l One set of Ni-SS hanging wire is included (pic to the left). Max. working temperature is 800C. l Optional hanging wire for higher working temperature is available upon request: ① Ni-Cr-Al wire (not included) Max. working temperature < 1100°C ② Platinium wire (not included) Max.working temperature > 1200°C and < 1600°C l A thin hanging wire goes through the top flange. A positive inert gas can keep processing tube under controlled atmosphere l For air-sensitive material, the sample shall be sealed in a small quartz tube with pre-vacuumed as Pic below right |
Motor and Controller | l 6"L x 4"W Touch Screen l Wire descending speed is programmable within 3 segments. l Precise DC step motor controls traveling speed. l Pulling speed range: 1-500 um/sec adjustable with the accuracy of +/- 0.05% l Total stoke length controlled by touch screen: 350mm l Power: 50W, 110V - 240VC l Optional:Lower speed range is available upon request at extra cost. |
Product Dimensions | l 520mm (L) x 430mm (W) x 1100mm (H) |
Laptop, software & WiFi Control (Optional) | l Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) l Labview Based Temperature Control System enables the user to edit temperature profile, manage heat-treatment recipe, record and plot data for STAI furnaces l A wireless remote control provides up to 300 meters operating range |
Warranty | l One-Year limited warranty with lifetime support l Consumable parts such as processing tubes, O-rings, and heating elements are not covered by the warranty |
Net Weight | l 105 kg (230 lbs) |
Shipping Weight | l 137 kg (300 lbs) |
Shipping Dimensions | l 48"(L) x 40"(W) x 68"(H) |
