The Furnace is a six channels 50mm O.D. tube furnace for high throughput heat treatment of alloy and ceramic material up to 1200°C. It is an excellent tool to research the phase diagram of new generation material
SPECIFICATIONS:
| Furnace Structure | The furnace is consistent with six-tube furnace modules with quartz tube 50 OD x 460 L, mm Each heating module's temperature is controlled independently up to 1200°C Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas Processing six batches of samples with the different temperatures at compact space
|
| Heating Element | Ni-Cr-Al- resistance wire |
| Working Temperature | Max.Working Temperature 1200° C |
| Processing Tube | High purity quartz tube with Φ50X L 460 mm, 6 tubes included 4 flowmeters are included The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves Max. Vacuum 10^-5 torr by a turbopump Only one vacuum pump required via a KF25 port.
|
| Temperature Control | Six digital Programmable Temperature Controllers built-in Includes over-temperature and broken thermal couple alert. 6 channel heating tube is controlled independently by 24 segments programmable temperature controller 6 S type Thermal Couple Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heater by one Laptop.
|
| Heating Rate | 20 °C/ min Max. |
| Temperature Accuracy | +/- 1.0 °C |
| Power & Working Voltage | 10 KW, 208 - 240V single phase, 50/60Hz ( if 6 heating modules operation at the same time ) Note： Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
|
| Compliance | |
Dimension | 1200 L x 680 W x 1000 H, mm |
| Warranty | |
Warning & Application note | Max pressure of this furnace is 7.5 PSI （0.5 atm). You must install a pressure regulator on your gas tank to avoid over-pressured. This furnace also can be modified as a larger CVD furnace system with a proper gas delivery system. Please contact us to discuss your special application.
|
The Furnace is a six channels 50mm O.D. tube furnace for high throughput heat treatment of alloy and ceramic material up to 1200°C. It is an excellent tool to research the phase diagram of new generation material
SPECIFICATIONS:
| Furnace Structure | The furnace is consistent with six-tube furnace modules with quartz tube 50 OD x 460 L, mm Each heating module's temperature is controlled independently up to 1200°C Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas Processing six batches of samples with the different temperatures at compact space
|
| Heating Element | Ni-Cr-Al- resistance wire |
| Working Temperature | Max.Working Temperature 1200° C |
| Processing Tube | High purity quartz tube with Φ50X L 460 mm, 6 tubes included 4 flowmeters are included The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves Max. Vacuum 10^-5 torr by a turbopump Only one vacuum pump required via a KF25 port.
|
| Temperature Control | Six digital Programmable Temperature Controllers built-in Includes over-temperature and broken thermal couple alert. 6 channel heating tube is controlled independently by 24 segments programmable temperature controller 6 S type Thermal Couple Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heater by one Laptop.
|
| Heating Rate | 20 °C/ min Max. |
| Temperature Accuracy | +/- 1.0 °C |
| Power & Working Voltage | 10 KW, 208 - 240V single phase, 50/60Hz ( if 6 heating modules operation at the same time ) Note： Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
|
| Compliance | |
Dimension | 1200 L x 680 W x 1000 H, mm |
| Warranty | |
Warning & Application note | Max pressure of this furnace is 7.5 PSI （0.5 atm). You must install a pressure regulator on your gas tank to avoid over-pressured. This furnace also can be modified as a larger CVD furnace system with a proper gas delivery system. Please contact us to discuss your special application.
|
